Home > Manufacturers >

Geek Vape Squonk 100W Mod Starter Kit
Geek Vape Squonk 100W Mod Starter Kit $64.89  - EJuice Connect


 
Alternative Views:


Geek Vape Aegis Squonk 100W TC Starter Kit

The Geek Vape Squonk 100W TC Starter Kit is a versatile modular vape mod with an interchangeable back section that can be swapped to convert it into a non-squonk vape mod. The Aegis 100W Squonk Mod has all the IPV67 protections and durability you would expect from Geek Vape while retaining the same form factor as other Aegis mods in the series. The pump section has 10ml bottom feed juice capacity. Adding juice is a breeze due to it's brilliantly designed, Leak Proof system. The Geek Vape Squonk utilizes the AS-100 Chipset that supports up to 100W output and is powered by a single 18650 battery (sold separately). The internal onboard AS Chip is highly advanced, implementing a similar OLED display from the Aegis 100W as well as a full temperature control suite with customized adjustments and allowing auto-detection for use of atomizers with a resistance as low as 0.05ohms The Geek Vape Squonk Kit is paired with the Tengu 24mm RDA (Included). The Tengu Bottom Feed RDA is a brand new rebuildable with a spacious build deck with a single elongated post in the middle bisecting the build deck. Designed for a dual coil configuration, a set of four terminals top secured via flathead screws are used to affix coil leads, tightening to fasten them in place to maintain a reliable connection. In the middle of the long post is a juice drip redirect, allowing for juice dripped through the wide-bore drip tip to be split between both sets of coil configurations. The Aegis Squonk Mod is a convertible squonker with everything you love about the legendary Aegis box Mod series. Grab one today!

Please Note: The interchangeable STANDARD backing is sold separately.
List Price: $89.99
Our Price: $64.89
Savings: $25.10

Product Code: GEEK-VAPE-SQUONK-KIT

Color



Qty:  
Description Extended Information
 
Geek Vape Aegis Squonk 100W TC Starter Kit
The Geek Vape Squonk 100W TC Starter Kit is a versatile modular IPV67 squonker mod with an interchangeable back section that can be swapped to convert it into a non-squonk vape mod. The Aegis 100W Squonk Mod has all the IPV67 protections and durability you would expect from Geek Vape while retaining the same form factor as other Aegis mods in the series. The pump section has 10ml bottom feed juice capacity. Adding juice is a breeze due to it's brilliantly designed, Leak Proof system. The Geek Vape Squonk utilizes the AS-100 Chipset that supports up to 100W output and is powered by a single 18650 battery (sold separately). The internal onboard AS Chip is highly advanced, implementing a similar OLED display from the Aegis 100W as well as a full temperature control suite with customized adjustments and allowing auto-detection for use of atomizers with a resistance as low as 0.05ohms The Geek Vape Squonk Kit is paired with the Tengu 24mm RDA (Included). The Tengu Bottom Feed RDA is a brand new rebuildable with a spacious build deck with a single elongated post in the middle bisecting the build deck. Designed for a dual coil configuration, a set of four terminals top secured via flathead screws are used to affix coil leads, tightening to fasten them in place to maintain a reliable connection. In the middle of the long post is a juice drip redirect, allowing for juice dripped through the wide-bore drip tip to be split between both sets of coil configurations. The Aegis Squonk Mod is a convertible squonker with everything you love about the legendary Aegis box Mod series. Grab one today!

Please Note: The interchangeable STANDARD backing is sold separately.
GeekVape Aegis Squonk 100W Mod:
  • Dimensions: 86mm x 41mm x 31.5mm
  • 10ml Squonk Bottle
  • Top Fill Design
  • 5-100W Wattage Output
  • 0.05-3.0ohm Resistance
  • AS-100 Chipset
  • Modes: Power, VPC, Temperature Control, Temperature Coefficient of
  • Resistance and Bypass
  • Single Firing Button
  • Dual Adjustment Buttons
  • Zinc-Aluminum Alloy and Rubberized Plastic Construction
  • OLED Display Screen
  • Interchangeable Squonking Section
  • Spring-Loaded 510 Connection
  • Micro USB Port
GeekVape Tengu 24mm RDA:
  • 24mm Diameter
  • Deep Juice Well
  • Large Build Deck with Single Post
  • 4 Terminals with Top Flathead Screws
  • Single or Dual Coil configuration
  • Optional Dripping Feature
  • Adjustable Honeycomb Middle Airflow
  • Side to Coil Airflow
  • Stainless Steel and Pyrex Construction
  • Gold Plated 510 Connection Pin
Package Includes:
  • 1x Aegis Squonk 100W Mod
  • 1x Tengu 24mm Tank
  • 2x 0.4ohm N80 Fused Clapton Coil
  • 1x Battery Door Assist Tool
  • 4x Agleted Cotton Strips
  • 1x Micro USB Cable
  • 1x User Manual
  • Spare Parts

Share your knowledge of this product. Be the first to write a review »